PRODUCT
Search
  • K095 - K215
K095 - K215

K095 - K215


Applictaion:
For HVAC, Combi boiler, Oil cooler, Air dryer, ...
Flow rate: 30 - 400 (LPM)
Capacity: 10.55 - 140.65 KW

Brazed Plate Heat Exchanger

K095
Unit (mm)
 
 
Kaori K095 BPHE
  Model Design/Test preeure Working Temp. Total Heat Transfer Area L Weight Total Volume
K095×18B/BV 30 bar / 43 bar -160℃ ~ 200℃ 0.760m2 53mm 7.0kg 1.496L
K095×26B/BV 1.140m2 72mm 8.8kg 2.200L
K095×30B/BV 1.331m2 82mm 9.7kg 2.552L
K095×34B/BV 1.520m2 92mm 10.5kg 2.904L
K095×40B/BV 1.805m2 106mm 11.9kg 3.432L
K095×48B/BV 2.185m2 125mm 13.6kg 4.136L
K095×60B/BV 2.755m2 154mm 16.3kg 5.192L
K095×80B/BV 3.705m2 202mm 20.7kg 6.952L
  K095×18 10 bar / 15 bar -160℃ ~ 200℃ 0.760m2 53mm 7.0kg 1.496L
K095×26 1.140m2 72mm 8.8kg 2.200L
K095×30 1.331m2 82mm 9.7kg 2.552L
K095×34 1.520m2 92mm 10.5kg 2.904L
K095×40 1.805m2 106mm 11.9kg 3.432L
K095×48 2.185m2 125mm 13.6kg 4.136L
K095×60 2.755m2 154mm 16.3kg 5.192L
K095×80 3.705m2 202mm 20.7kg 6.952L
 
Threaded Connector
PT/NPT/GB Male PT/NPT/GB Female
1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2"
                         
 
Solder Connector
12.9mm 16.15mm 19.25mm 22.36mm 28.8mm 35.25mm 41.5mm
1/2" 5/8" 6/8" 7/8" 1-1/8" 1-3/8" 1-5/8"
     
Connector Crawing
 
 
FEATURE:
  Temperature Monitoring:
Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of temperature sensor and acheive accurate system control.
  Extra Strength:
When high working pressure is required (ex: R410 refrigreation system), Kaori offers "S" type BPHE. Kaori "S" type BPHE is designed to withstand up to 653 psi (45bar) of working pressure and is tested with 943 psi (65bar) of pressure.
  Distributor:
Kaori "V" type BPHE implements an unique distributor design which ensures even allocation of refrigerant within flow channels.
  Dual Circuit:
Kaori "D" type BPHE is designed to handle two compressors at the same time. This model further simplifies your already delicate design.
* Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )

K105
Unit (mm)
 
 
Kaori K105 BPHE
  Model Design/Test preeure Working Temp. Total Heat Transfer Area L Weight Total Volume
K105×18 C/B/BV/CV 30 bar / 43 bar -160℃ ~ 200℃ 0.853m2 53mm 7.8kg 1.904L
K105×26 C/B/BV/CV 1.279m2 73mm 9.7kg 2.800L
K105×30 C/B/BV/CV 1.492m2 82mm 10.7kg 3.248L
K105×34 C/B/BV/CV 1.706m2 92mm 11.6kg 3.696L
K105×40 C/B/BV/CV 2.025m2 106mm 13.1kg 4.368L
K105×48 C/B/BV/CV 2.452m2 125mm 15.0kg 5.264L
K105×60 C/B/BV/CV 3.091m2 154mm 17.9kg 6.608L
K105×80 C/B/BV/CV 4.157m2 202mm 22.7kg 8.848L
K105×18 10 bar / 15 bar -160℃ ~ 200℃ 0.853m2 53mm 7.8kg 1.904L
K105×26 1.279m2 72mm 9.7kg 2.800L
K105×30 1.492m2 82mm 10.7kg 3.248L
K105×34 1.706m2 92mm 11.6kg 3.696L
K105×40 2.025m2 106mm 13.1kg 4.368L
K105×48 2.452m2 125mm 15.0kg 5.264L
K105×60 3.091m2 154mm 17.9kg 6.608L
K105×80 4.157m2 202mm 22.7kg 8.848L
 
Threaded Connector
PT/NPT/GB Male PT/NPT/GB Female
1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2"
                   
 
Solder Connector
12.9mm 16.15mm 19.25mm 22.36mm 28.8mm 35.25mm 41.5mm
1/2" 5/8" 6/8" 7/8" 1-1/8" 1-3/8" 1-5/8"
 
Connector Crawing
 
 
FEATURE:
  Hydraulic:
Kaori "H" type BPHE is designed to withstand repetative high stress when working in hydraulic related enviroment. Its muscular body structure shows off its strength.
  Distributor:
Kaori "V" type BPHE implements an unique distributor design which ensures even allocation of refrigerant within flow channels.
  Temperature Monitoring:
Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of temperature sensor and acheive accurate system control.
  Extra Strength:
When high working pressure is required (ex: R410 refrigreation system), Kaori offers "S" type BPHE. Kaori "S" typeBPHE is designed to withstand up to 653 psi (45bar) of working pressure and is tested with 943 psi (65bar) of pressure.
  Dual Circuit:
Kaori "D" type BPHE is designed to handle two compressors at the same time. This model further simplifies your already delicate design.
* Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )

K200
Unit (mm)
 
 
Kaori K200 BPHE
  Model Design/Test
preeure
Working Temp. Total Heat
Transfer Area
L Weight Total Volume
Copper Brazing /
Nickel Brazing
K200×10 Cu Brazing - 30 bar / 43 bar
Ni Brazing - 10 bar / 15 bar
-150℃ ~ 200℃ 0.756m2 38mm 11.22kg 1.854L
K200×12 0.945m2 42.8mm 12.04kg 2.266L
K200×14 1.134m2 47.6mm 12.86kg 2.678L
K200×16 1.322m2 52.4mm 13.68kg 3.09L
K200×18 1.511m2 57.2mm 14.5kg 3.502L
K200×20 1.700m2 62mm 15.32kg 3.914L
K200×22 1.889m2 66.8mm 16.14kg 4.326L
K200×24 2.078m2 71.6mm 16.96kg 4.738L
K200×26 2.267m2 76.4mm 17.78kg 5.15L
K200×28 2.456m2 81.2mm 18.6kg 5.562L
K200×30 2.645m2 86mm 19.42kg 5.974L
K200×32 2.834m2 90.8mm 20.24kg 6.386L
K200×34 3.023m2 95.6mm 21.06kg 6.798L
K200×36 3.212m2 100mm 21.88kg 7.21L
K200×38 3.401m2 105mm 22.7kg 7.622L

K205
Unit (mm)
 
 
Kaori K205 BPHE
  Model Design/Test preeure Working Temp. Total Heat
Transfer Area
L Weight Total
Volume
K205×30 C/V 30bar/43bar -160℃ ~ 200℃ 3.077m2 84mm 22.8kg 6.699L
K205×34 C/V 3.517m2 93mm 24.8kg 7.623L
K205×40 C/V 4.176m2 108mm 28.0kg 9.009L
K205×60 C/V 6.374m2 156mm 38.4kg 13.629L
K205×80 C/V 8.572m2 204mm 48.8kg 18.249L
K205×100 C/V 10.770m2 252mm 59.2kg 22.869L
K205×30 10 bar / 15 bar -160℃ ~ 200℃ 3.077m2 84mm 22.8kg 6.699L
K205×34 3.517m2 93mm 24.8kg 7.623L
K205×40 4.176m2 108mm 28.0kg 9.009L
K205×60 6.374m2 156mm 38.4kg 13.629L
K205×80 8.572m2 204mm 48.8kg 18.249L
K205×100 10.770m2 252mm 59.2kg 22.869L
 
Threaded Connector
PT/NPT/GB Male PT/NPT/GB Female
1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2"
. . . . . . . . .
 
Solder Connector
12.9mm 16.15mm 19.25mm 22.36mm 28.8mm 35.25mm 41.5mm
1/2" 5/8" 6/8" 7/8" 1-1/8" 1-3/8" 1-5/8"
     
Connector Crawing
 
 
FEATURE:
  Distributor:
Kaori "V" type BPHE implements an unique distributor design which ensures even allocation of refrigerant within   flow channels.
  Hydraulic:
Kaori "H" type BPHE is designed to withstand repetative high stress when working in hydraulic related   enviroment. Its muscular body structure shows off its strength.
  Temperature Monitoring:
Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of   temperature sensor and acheive accurate system control.
  Dual Circuit:
Kaori "D" type BPHE is designed to handle two compressors at the same time. This model further simplifies   your already delicate design.  
* Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )

K210
 
 
Kaori K210 BPHE
Model Design/Test preeure Working Temp. Total Heat
Transfer Area
L Weight Total Volume
K210×30 M/F 16 bar / 23 bar -160℃ ~ 200℃ 2.901m2 97mm 23.2kg 6.786L
K210×40 M/F 3.937m2 125mm 28.1kg 9.126L
K210×50 M/F 4.973m2 154mm 33.0kg 11.466L
K210×60 M/F 6.009m2 182mm 37.9kg 13.806L
K210×70 M/F 7.045m2 211mm 42.8kg 16.146L
K210×80 M/F 8.081m2 239mm 47.7kg 18.486L
K210×90 M/F 9.117m2 268mm 52.6kg 20.826L
K210×100 M/F 10.153m2 296mm 57.5kg 23.166L
K210×110 M/F 11.189m2 325mm 62.4kg 25.506L
K210×120 M/F 12.225m2 353mm 67.3kg 27.846L
K210×130 M/F 13.261m2 382mm 72.2kg 30.186L
K210×140 M/F 14.297m2 410mm 77.1kg 32.526L
 
Threaded Connector
PT/NPT/GB Male PT/NPT/GB Female
1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2"
               
 
Solder Connector
12.9mm 16.15mm 19.25mm 22.36mm 28.8mm 35.25mm 41.5mm
1/2" 5/8" 6/8" 7/8" 1-1/8" 1-3/8" 1-5/8"
         
Connector Crawing
 
 
FEATURE:
  Air Dyer:
A compact solution for air dryer application - Kaori offers air dryer unit in the form of BPHE; the easiest way to miniaturize your air dryer package.
  Temperature Monitoring:
Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of temperature sensor and acheive accurate system control.
* Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )
K215
Unit (mm)
 
 
Kaori K215 BPHE
  Model Design/Test
preeure
Working Temp. Total Heat
Transfer Area
L Weight Total Volume
K215×18 D/DV 30 bar / 43 bar -160℃ ~ 200℃ 1.765m2 56mm 16.5kg 3.74L
K215×30 D/DV 3.088m2 84mm 22.8kg 6.38L
K215×38 D/DV 3.971m2 103mm 26.9kg 8.14L
K215×58 D/DV 6.177m2 150mm 37.3kg 12.54L
K215×66 D/DV 7.059m2 169mm 41.5kg 14.30L
K215×78 D/DV 8.383m2 197mm 47.7kg 16.94L
K215×118 D/DV   12.795m2 291mm 68.5kg 25.74L
 
Threaded Connector
PT/NPT/GB Male PT/NPT/GB Female
1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2"
                       
 
Solder Connector
12.9mm 16.15mm 19.25mm 22.36mm 28.8mm 35.25mm 41.5mm
1/2" 5/8" 6/8" 7/8" 1-1/8" 1-3/8" 1-5/8"
         
Connector Crawing
 
 
FEATURE:
  Distributor:
Kaori "V" type BPHE implements an unique distributor design which ensures even allocation of refrigerant within   flow channels.
  Temperature Monitoring:
Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of   temperature sensor and acheive accurate system control.
  Dual Circuit:
Kaori "D" type BPHE is designed to handle two compressors at the same time. This model further simplifies your   already delicate design.
* Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )

--------------------------------------------------

HOP NHAT TECHNOLOGY CO., LTD

Head office: 36-38 St., No 9, LinhTrung War., Thu Duc Dist., Ho Chi Minh City, Viet Nam
Tel: (84.8) 62841085, 62841040;  Fax: (84.8) 62841105

Hanoi office : Room 504, 20C CT Building, Viet Hung urban, Long Bien Dist., Ha Noi capital,

Tel: (84.4) 36574162                     Fax: (84.4) 36574163

Email: info@hopnhatvn.com      Website: www.hopnhatvn.com

| Product Other|

PRODUCT