Tìm kiếm

MÁY TẠO KHÍ NITƠ OXYMAT - EU

Mã số: oxymat

NITROGEN PRODUCT RANGE

The PSA process is an extremely clean operation and the only ‘raw material’ is ‘air’. On-site generators allow for an uninterrupted supply of gas with a high purity output. This means that you can produce gas where and when you need it, and in the exact quantity and quality you need.

Our Nitrogen Product range covers 18 standard models with capacity in the range from 0,27 to 5.400 m3/hour. Flow meassured in Sm3/h. Purity up to 99,9999% ...

X-versions 3 to 6 are supplied as framebuilt solutions, buffer vessels, filters, Advanced control, dewpoint, pressure, temperature, flow, purity and remote monitoring included.

Notes:
*1 – Stated flow in Sm³/hour are for operation with reference to 15°C, 981 mbar. Inlet pressure 7 barG. Flow variance ±5%
*2 – Stated air consumtions in FAD m³/min are for operation with reference to 20°C, 1 barA, -acc. to ISO1217c
*3 – Capacity of the plant is stated at 30°C ambient air temperature. Variance±5%

Nitrogen Generator System

How it works :

At Oxymat, we use two columns with molecular sieves to ensure continuous production.
Dry compressed air is blown through a valve to the vessel where the pressure is built to reach 5 to 7 bar(g). Nitrogen is tied to a molecular sieve during the building of pressure, and the oxygen is allowed to pass through to the accumulation tank.
While pressure is build in one vessel, the second remains without pressure.
A part of the produced gas is used for regeneration of the molecular sieve.
For Nitrogen a Carbon Molecular Sieve (CMS) is used. The molecular sieve is fully regenerative and has a life span on to 40.000 operation hours