Tìm kiếm

K095 - K215

Hãng sản xuất: SOTRAS

Ứng dụng:
Cho hệ thống lạnh công nghiệp, nồi hơi, giải nhiệt dầu, trao đổi nhiệt máy sấy, ....
Lưu lượng: 2 - 16 lít/phút
Công suất: 10.55 - 140.65 KW

Brazed Plate Heat Exchanger

K095

Unit (mm)

Kaori K095 BPHE
	Model	Design/Test preeure	Working Temp.	Total Heat Transfer Area	L	Weight	Total Volume
	K095×18B/BV	30 bar / 43 bar	-160℃ ~ 200℃	0.760m²	53mm	7.0kg	1.496L
	K095×26B/BV			1.140m²	72mm	8.8kg	2.200L
	K095×30B/BV			1.331m²	82mm	9.7kg	2.552L
	K095×34B/BV			1.520m²	92mm	10.5kg	2.904L
	K095×40B/BV			1.805m²	106mm	11.9kg	3.432L
	K095×48B/BV			2.185m²	125mm	13.6kg	4.136L
	K095×60B/BV			2.755m²	154mm	16.3kg	5.192L
	K095×80B/BV			3.705m²	202mm	20.7kg	6.952L

K095×18	10 bar / 15 bar	-160℃ ~ 200℃	0.760m²	53mm	7.0kg	1.496L
K095×26			1.140m²	72mm	8.8kg	2.200L
K095×30			1.331m²	82mm	9.7kg	2.552L
K095×34			1.520m²	92mm	10.5kg	2.904L
K095×40			1.805m²	106mm	11.9kg	3.432L
K095×48			2.185m²	125mm	13.6kg	4.136L
K095×60			2.755m²	154mm	16.3kg	5.192L
K095×80			3.705m²	202mm	20.7kg	6.952L

Threaded Connector

PT/NPT/GB Male

PT/NPT/GB Female

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

※

Solder Connector
12.9mm	16.15mm	19.25mm	22.36mm	28.8mm	35.25mm	41.5mm
1/2"	5/8"	6/8"	7/8"	1-1/8"	1-3/8"	1-5/8"
※	※		※	※

Connector Crawing

FEATURE：

Temperature Monitoring：

Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of temperature sensor and acheive accurate system control.

Extra Strength：

When high working pressure is required (ex: R410 refrigreation system), Kaori offers "S" type BPHE. Kaori "S" type BPHE is designed to withstand up to 653 psi (45bar) of working pressure and is tested with 943 psi (65bar) of pressure.

Distributor：

Kaori "V" type BPHE implements an unique distributor design which ensures even allocation of refrigerant within flow channels.

Dual Circuit：

Kaori "D" type BPHE is designed to handle two compressors at the same time. This model further simplifies your already delicate design.
＊ Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )

K105

Unit (mm)

Kaori K105 BPHE
	Model	Design/Test preeure	Working Temp.	Total Heat Transfer Area	L	Weight	Total Volume
	K105×18 C/B/BV/CV	30 bar / 43 bar	-160℃ ~ 200℃	0.853m²	53mm	7.8kg	1.904L
	K105×26 C/B/BV/CV			1.279m²	73mm	9.7kg	2.800L
	K105×30 C/B/BV/CV			1.492m²	82mm	10.7kg	3.248L
	K105×34 C/B/BV/CV			1.706m²	92mm	11.6kg	3.696L
	K105×40 C/B/BV/CV			2.025m²	106mm	13.1kg	4.368L
	K105×48 C/B/BV/CV			2.452m²	125mm	15.0kg	5.264L
	K105×60 C/B/BV/CV			3.091m²	154mm	17.9kg	6.608L
	K105×80 C/B/BV/CV			4.157m²	202mm	22.7kg	8.848L

K105×18	10 bar / 15 bar	-160℃ ~ 200℃	0.853m²	53mm	7.8kg	1.904L
K105×26			1.279m²	72mm	9.7kg	2.800L
K105×30			1.492m²	82mm	10.7kg	3.248L
K105×34			1.706m²	92mm	11.6kg	3.696L
K105×40			2.025m²	106mm	13.1kg	4.368L
K105×48			2.452m²	125mm	15.0kg	5.264L
K105×60			3.091m²	154mm	17.9kg	6.608L
K105×80			4.157m²	202mm	22.7kg	8.848L

Threaded Connector

PT/NPT/GB Male

PT/NPT/GB Female

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

※

Solder Connector
12.9mm	16.15mm	19.25mm	22.36mm	28.8mm	35.25mm	41.5mm
1/2"	5/8"	6/8"	7/8"	1-1/8"	1-3/8"	1-5/8"
※	※	※	※	※	※

Connector Crawing

FEATURE：

Hydraulic：

Kaori "H" type BPHE is designed to withstand repetative high stress when working in hydraulic related enviroment. Its muscular body structure shows off its strength.

Distributor：

Kaori "V" type BPHE implements an unique distributor design which ensures even allocation of refrigerant within flow channels.

Temperature Monitoring：

Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of temperature sensor and acheive accurate system control.

Extra Strength：

When high working pressure is required (ex: R410 refrigreation system), Kaori offers "S" type BPHE. Kaori "S" typeBPHE is designed to withstand up to 653 psi (45bar) of working pressure and is tested with 943 psi (65bar) of pressure.

Dual Circuit：

K200

Unit (mm)

Kaori K200 BPHE
	Model	Design/Test preeure	Working Temp.	Total Heat Transfer Area	L	Weight	Total Volume
Copper Brazing / Nickel Brazing	K200×10	Cu Brazing - 30 bar / 43 bar Ni Brazing - 10 bar / 15 bar	-150℃ ~ 200℃	0.756m²	38mm	11.22kg	1.854L
	K200×12			0.945m²	42.8mm	12.04kg	2.266L
	K200×14			1.134m²	47.6mm	12.86kg	2.678L
	K200×16			1.322m²	52.4mm	13.68kg	3.09L
	K200×18			1.511m²	57.2mm	14.5kg	3.502L
	K200×20			1.700m²	62mm	15.32kg	3.914L
	K200×22			1.889m²	66.8mm	16.14kg	4.326L
	K200×24			2.078m²	71.6mm	16.96kg	4.738L
	K200×26			2.267m²	76.4mm	17.78kg	5.15L
	K200×28			2.456m²	81.2mm	18.6kg	5.562L
	K200×30			2.645m²	86mm	19.42kg	5.974L
	K200×32			2.834m²	90.8mm	20.24kg	6.386L
	K200×34			3.023m²	95.6mm	21.06kg	6.798L
	K200×36			3.212m²	100mm	21.88kg	7.21L
	K200×38			3.401m²	105mm	22.7kg	7.622L

K205

Unit (mm)

Kaori K205 BPHE
	Model	Design/Test preeure	Working Temp.	Total Heat Transfer Area	L	Weight	Total Volume
	K205×30 C/V	30bar/43bar	-160℃ ~ 200℃	3.077m²	84mm	22.8kg	6.699L
	K205×34 C/V			3.517m²	93mm	24.8kg	7.623L
	K205×40 C/V			4.176m²	108mm	28.0kg	9.009L
	K205×60 C/V			6.374m²	156mm	38.4kg	13.629L
	K205×80 C/V			8.572m²	204mm	48.8kg	18.249L
	K205×100 C/V			10.770m²	252mm	59.2kg	22.869L

K205×30	10 bar / 15 bar	-160℃ ~ 200℃	3.077m²	84mm	22.8kg	6.699L
K205×34			3.517m²	93mm	24.8kg	7.623L
K205×40			4.176m²	108mm	28.0kg	9.009L
K205×60			6.374m²	156mm	38.4kg	13.629L
K205×80			8.572m²	204mm	48.8kg	18.249L
K205×100			10.770m²	252mm	59.2kg	22.869L

Threaded Connector

PT/NPT/GB Male

PT/NPT/GB Female

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

※

Solder Connector
12.9mm	16.15mm	19.25mm	22.36mm	28.8mm	35.25mm	41.5mm
1/2"	5/8"	6/8"	7/8"	1-1/8"	1-3/8"	1-5/8"
※	※		※	※

Connector Crawing

FEATURE：

Distributor：

Kaori "V" type BPHE implements an unique distributor design which ensures even allocation of refrigerant within 　 flow channels.

Hydraulic：

Kaori "H" type BPHE is designed to withstand repetative high stress when working in hydraulic related 　 enviroment. Its muscular body structure shows off its strength.

Temperature Monitoring：

Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of 　 temperature sensor and acheive accurate system control.

Dual Circuit：

Kaori "D" type BPHE is designed to handle two compressors at the same time. This model further simplifies 　 your already delicate design. 　
＊ Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )

K210

Kaori K210 BPHE
Model	Design/Test preeure	Working Temp.	Total Heat Transfer Area	L	Weight	Total Volume
K210×30 M/F	16 bar / 23 bar	-160℃ ~ 200℃	2.901m²	97mm	23.2kg	6.786L
K210×40 M/F			3.937m²	125mm	28.1kg	9.126L
K210×50 M/F			4.973m²	154mm	33.0kg	11.466L
K210×60 M/F			6.009m²	182mm	37.9kg	13.806L
K210×70 M/F			7.045m²	211mm	42.8kg	16.146L
K210×80 M/F			8.081m²	239mm	47.7kg	18.486L
K210×90 M/F			9.117m²	268mm	52.6kg	20.826L
K210×100 M/F			10.153m²	296mm	57.5kg	23.166L
K210×110 M/F			11.189m²	325mm	62.4kg	25.506L
K210×120 M/F			12.225m²	353mm	67.3kg	27.846L
K210×130 M/F			13.261m²	382mm	72.2kg	30.186L
K210×140 M/F			14.297m²	410mm	77.1kg	32.526L

Threaded Connector

PT/NPT/GB Male

PT/NPT/GB Female

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

※

Solder Connector
12.9mm	16.15mm	19.25mm	22.36mm	28.8mm	35.25mm	41.5mm
1/2"	5/8"	6/8"	7/8"	1-1/8"	1-3/8"	1-5/8"
※					※

Connector Crawing

FEATURE：

Air Dyer：

A compact solution for air dryer application - Kaori offers air dryer unit in the form of BPHE; the easiest way to miniaturize your air dryer package.

Temperature Monitoring：

Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of temperature sensor and acheive accurate system control.
＊ Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )

K215

Unit (mm)

Kaori K215 BPHE
	Model	Design/Test preeure	Working Temp.	Total Heat Transfer Area	L	Weight	Total Volume
	K215×18 D/DV	30 bar / 43 bar	-160℃ ~ 200℃	1.765m²	56mm	16.5kg	3.74L
	K215×30 D/DV			3.088m²	84mm	22.8kg	6.38L
	K215×38 D/DV			3.971m²	103mm	26.9kg	8.14L
	K215×58 D/DV			6.177m²	150mm	37.3kg	12.54L
	K215×66 D/DV			7.059m²	169mm	41.5kg	14.30L
	K215×78 D/DV			8.383m²	197mm	47.7kg	16.94L
	K215×118 D/DV			12.795m²	291mm	68.5kg	25.74L

Threaded Connector

PT/NPT/GB Male

PT/NPT/GB Female

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

1/2"

3/4"

1-1/4"

1-1/2"

2-1/2"

※

Solder Connector
12.9mm	16.15mm	19.25mm	22.36mm	28.8mm	35.25mm	41.5mm
1/2"	5/8"	6/8"	7/8"	1-1/8"	1-3/8"	1-5/8"
	※				※

Connector Crawing

FEATURE：

Distributor：

Kaori "V" type BPHE implements an unique distributor design which ensures even allocation of refrigerant within 　 flow channels.

Temperature Monitoring：

Kaori "T" type BPHE is designed with two temperature sensor ports. These ports enable easy installation of 　 temperature sensor and acheive accurate system control.

Dual Circuit：

Kaori "D" type BPHE is designed to handle two compressors at the same time. This model further simplifies your 　 already delicate design.
＊ Please Refer to the Legends in the Folded Panel on Page7. ( ALL pages )

--------------------------------------------------

HOP NHAT TECHNOLOGY CO., LTD

Head office: 36-38 St., No 9, LinhTrung War., Thu Duc Dist., Ho Chi Minh City, Viet Nam
Tel: (84.8) 62841085, 62841040; Fax: (84.8) 62841105

Hanoi office : Room 504, 20C CT Building, Viet Hung urban, Long Bien Dist., Ha Noi capital,

Tel: (84.4) 36574162 Fax: (84.4) 36574163

Email: info@hopnhatvn.com Website: www.hopnhatvn.com

K095 - K215