Tìm kiếm

GIỚI THIỆU VỀ BỘ TRAO ĐỔI NHIỆT DẠNG TẤM

Hãng sản xuất: SOTRAS

Cho hệ thống lạnh công nghiệp, nồi hơi, giải nhiệt dầu, trao đổi nhiệt máy sấy, ....

Brazed Plate Heat Exchanger

OUR PRODUCTS - BPHE

Kaori's brazed type heat exchanger consists of a series of thin and
corrugated stainless steel plates. These plates are compressed
and brazed together with copper or nickel depending on the
application. This creates flowing channels between plates, with
one fluid in odd number channels and the other in the even
number channels, thus reaching the purpose of heat exchanging.
Different from the gasket seal type, brazing type uses soldering
material (copper or nickel depending on the application) to seal the
exchanger. By applying high temperatures in the vacuum
environment at the manufacturing process, it melts down the
soldering material to form the seal between each of the plates.

ADVANTAGES ON THE BRAZED PLATE HEAT EXCHANGER

High corrosion resistant
All plates uses SUS316 material. Brazing materials come in copper or nickel versions. These materials offer high corrosion resistance against a variety of fluids.
High pressure resistant
Thanks to the brazing process, plate heat exchangers are pressure resistant up to 45 bar.*
High thermal efficiency
Carefully designed plate pattern of the corrugated plates easily achieves high thermal transfer rate in either counter flow or parallel flow arrangement.
High working temperature
BPHE's SUS316 material structure offers higher working temperature range up to 200℃.
Compactness
BPHE is much lighter in weight and smaller in size, if compared to shell tube exchangers; about 1/5 the size of the shell tube exchanger of the same capacity. This advantage makes BPHE easier to install and replace.
Low maintenance
The corrugated plates are designed to achieve turbulence flow at a low flow rate, thus decreasing the need for frequent maintenance.

Brazed Plate Heat Exchanger

WHAT BPHE DO WE OFFER

K025

K030

K040

K050

K070

K095

K105

K200

K205

K210

K215

Cu Brazing

○

Ni Brazing

○

Heat Transfer Area / Plate

0.0120m²

0.0117m²

0.0255m²

0.0300m²

0.0475m²

0.0533m²

0.09446m²

0.1099m²

0.1036m²

0.1100m²

Plate Material

AISI316

Kaori Model Performance Range Diagram

	K030		K050 / K070		K095 / K105		K200 / K205		K215
	Min.	Max.	Min.	Max.	Min.	Max.	Min.	Max.	Min.	Max.
Capaccity(kW)	0.72	5.7	1.76	17.58	10.55	43.95	35.16	105.49	35.16	140.65
Flow Rate(lpm)	2	16	5	50	30	125	100	300	100	400